July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

Fig 1: View Of Upper Striker

GM870155

Courtesy of GENERAL MOTORS CORP.

Install the striker and shim(s) to the roof panel.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the bolts retaining the striker to the roof panel.
Adjust the striker using the procedure below:
- Tighten the bolts to a sung fit.
- Close the door to self align striker.
- Check for door fit.
- Add or remove shims as required (maximum of 3).
  Tighten: Tighten the striker bolts to 10 N.m (89 lb in).

Fig 2: View Of Rear Side Door Upper Latch Striker Cover

GM303376

Courtesy of GENERAL MOTORS CORP.

Install the upper latch striker cover.