LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2003 >> Yukon Denali >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Steering Gear Housing End Plug Replacement - Off Vehicle >> Assembly Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Assembly Procedure

  1. Lubricate the O-ring seal (3) with power steering fluid.
  2. Install the O-ring seal (3) into the steering gear housing (5).
  3. Install the plug (2).
  4. Install the retaining ring (1). Ensure that the retaining ring open end is approximately 25 mm (1 in) from the access hole in the steering gear housing (5).
    Fig 1: Installing O-Ring Seal
    G01454982Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals