LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2002 >> S15/T15 Jimmy 4WD V6-4.3L VIN W >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Module HVAC >> Service and Repair >> HVAC System - Automatic >> Blower Motor Control Processor Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Blower Motor Control Processor Replacement

REMOVAL PROCEDURE




1. Disconnect the pigtail harness connectors (1, 2) from the blower motor.




2. Disconnect the electrical connector (4) from the blower motor control processor (2).
3. Remove the blower motor control processor mounting screws (1).
4. Remove the blower motor control processor (2) from the blower case.

INSTALLATION PROCEDURE




1. Install the blower motor control processor (2) to the blower case.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the blower motor control processor mounting screws (1).

Tighten
Tighten the screws to 1.9 N.m (17 lb in).

3. Connect the electrical connector (4) to the blower motor control processor (2).




4. Connect the pigtail harness connectors (1 and 2) to the blower motor.

scientia non olet · About LEMON Manuals