LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 565 (Starting System) >> Removal & Installation >> Starter >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal & Installation: Starter: Installation

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the starter motor to the vehicle. Install the upper mounting bolt finger tight. Install the lower mounting bolt. Tighten to specification. See TORQUE SPECIFICATIONS .
  2. Tighten upper mounting bolt to specification. See TORQUE SPECIFICATIONS . Install the starter motor electrical connector to the solenoid.
  3. Install the positive battery cable and the retaining nut to the starter solenoid. Tighten to specification. See TORQUE SPECIFICATIONS .
  4. Connect the negative battery cable. Tighten to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals