LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1396 (Door System, Mirror System & Window System) >> Repair Instructions >> Window Weatherstrip Run Channel Assembly Replacement - Front >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Weatherstrip/Run Channel
    GM691011Courtesy of GENERAL MOTORS CORP.
  1. Install the weatherstrip/run channel to the door.
  2. Position the tabs on the weatherstrip/run channel into the slots in the door.
  3. Press the weatherstrip/run channel into the window frame opening.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the 2 retaining bolts.

    Tighten:  Tighten the retaining bolts to 10 N.m (88 lb in).

  5. Install the outside rearview mirror. Refer to Mirror Replacement .
  6. Install the window. Refer to Window Replacement - Front Door .
  7. Install the water deflector. Refer to Water Deflector Replacement - Front Door .
  8. Install the speaker. Refer to Speaker Replacement - Front Door in Entertainment.
  9. Install the door trim panel. Refer to Trim Panel Replacement - Side Front Door .
scientia non olet · About LEMON Manuals