LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 1995 >> Yukon 4D Utility >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 5.7L. >> Knock Sensor (KS) Module >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

Locate KS module on top right side of engine. Turn ignition off. Disconnect KS module harness connector. Remove KS module mounting screws and remove KS module. To install, reverse removal procedure.

scientia non olet · About LEMON Manuals