September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Window Regulator: Removal
- Disconnect negative battery cable.
- Remove door trim panel. Refer to DOOR TRIM PANEL
.
- Remove water deflector. Refer to WATER DEFLECTOR
.
- Disconnect door lock linkage.
- Remove door module and glass. Refer to DOOR MODULE
.
- Remove window, bend the tab down on the window run channel to slide the door glass, from the regulator roller assembly. See Figure
and Figure
.
- Remove regulator assembly rivets.
- Remove regulator and motor as a unit.