October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Procedures

STANDARD PROCEDURE - DRAIN AND FILL

NOTE: Drain oil when warm.

1. Clean area around oil fill plug and drain plug.

2. Remove oil drain plug and drain oil (Fig. 1).
3. Install oil drain plug and tighten to 100 Nm (74 ft. lbs.).
4. Remove oil fill plug and fill housing up to bottom edge of oil fill hole (Fig. 1).
5. Install oil fill plug and tighten to 100 Nm (74 ft. lbs.).