Front

DISC BRAKE CALIPER ADAPTER - REAR

REMOVAL
1. Unscrew the cap from the brake fluid reservoir.
2. Raise and support the vehicle.
3. Remove the front wheels .
4. Remove the disc brake caliper from the caliper adapter.
5. Remove the disc brake pads.
6. Remove the disc brake caliper adapter.

INSTALLATION
1. Install the brake caliper adapter to the steering knuckle. Tighten to 170 Nm (125 ft. lbs.).
2. Install the disc brake shoes.

NOTE: Do not install the brake hose twisted and ensure freedom of movement.

3. Install the disc brake caliper. Tighten the bolt to 14 Nm (124 inch lbs.).
4. Install the front wheels.
5. Lower the vehicle.