Section 212 (Driveshaft): Specifications
WARNING: This page is about a different car, the 2024 Ford Maverick. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Specification |
|---|---|
| Driveshaft runout | 0.6 mm (0.024 in) |
| Driveshaft to transfer case flange joint angle (Transfer case-end driveshaft tube relative to transmission pan) | 2.2deg. |
| Driveshaft center bearing joint angle (transfer case-end driveshaft tube relative to RDU -end driveshaft tube) | 1deg. |
| Driveshaft to RDUCV -joint angle (RDU -end driveshaft tube relative to rear axle housing locator pad) | 3.2deg. |