LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2024 >> Bronco Big Bend, 4D Utility, Automatic T/Case Control, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) And Stability Control >> Removal And Installation >> Hydraulic Control Unit (HCU) >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Hydraulic Control Unit (HCU): Installation

  1. To install, reverse the removal procedure.
  2. Using a diagnostic scan tool, complete the PMI process for the ABS module following the on-screen instructions.
  3. Bleed the brake system. Refer to: Brake System Pressure Bleeding - Vehicles With: Vacuum Brake Booster .
  4. Carry out the ABS Calibration and the HCU Solenoid Calibration service functions following the diagnostic scan tool on-screen instructions.
  5. Run the PCM PATS programming application and then carry out the Module Initialization (Parameter reset) using the scan tool and following the on-screen instructions.
scientia non olet · About LEMON Manuals