LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2020 >> Fusion SEL >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Charging And Controls - 1.5L ECOBOOST (118KW/160PS) - I4 >> Removal And Installation >> Fuel Pump Driver Module (FPDM) >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fuel Pump Driver Module (FPDM): Removal

NOTE: The fuel pump driver module is located behind the left C-pillar lower trim panel.
  1. Remove the left C-pillar lower trim panel. Refer to: C-Pillar Lower Trim Panel .
    • Disconnect the fuel pump driver module electrical connector.

    • Remove the fuel pump driver module retaining nuts, then remove the fuel pump driver module.

GFD481738Courtesy of FORD MOTOR COMPANY