Normal Operation and Fault Conditions
With the ignition ON, the SOD-L and SOD-R send messages to the ABS module through the GWM over the MS-CAN. If the ABS module does not receive these messages within a certain time frame, the module sets DTCs. For information on the messages sent to the ABS module by the SOD-L and SOD-R, refer to the Network Message Chart in Description and Operation in the Anti-Lock Brake System (ABS) and Stability Control article.
PPT BZ ABS MODULE DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0232:00 | Lost Communication With Side Obstacle Detection Control Module "A": No Sub Type Information | This DTC sets when the ABS module does not receive messages from the SOD-L in the alloted time. This can be due to a SOD-L failure, a circuit failure on the network or an excessive load on the network. |
| U0233:00 | Lost Communication With Side Obstacle Detection Control Module "B": No Sub Type Information | This DTC sets when the ABS module does not receive messages from the SOD-R in the alloted time. This can be due to a SOD-R failure, a circuit failure on the network or an excessive load on the network. |