LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2020 >> Escape S, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (MULTIFUNCTION Electronic Modules) >> Removal And Installation >> Body Control Module (BCM) >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Body Control Module (BCM): Installation

WARNING: This page is about a different car, the 2020 Lincoln Corsair. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
    NOTE: Carry out the remaining steps only if installing a new BCM (body control module).
  2. Using a diagnostic scan tool, complete the PMI configuration following the on-screen instructions. Refer to: Module Configuration - System Operation and Component Description .
  3. Using a diagnostic scan tool, carry out the BCM self-test (must include an on-demand self-test) and then repeat the self-test to confirm all DTC have been cleared.