LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2019 >> Taurus SHO >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle/Transmission - 6F35 >> Removal And Installation >> Digital Transmission Range (TR) Sensor >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Digital Transmission Range (TR) Sensor: Removal

  1. Remove the main control cover. Refer to Main Control Cover .
  2. GFD341160Courtesy of FORD MOTOR COMPANY
  3. GFD341161Courtesy of FORD MOTOR COMPANY
  4. GFD341162Courtesy of FORD MOTOR COMPANY
  5. GFD341163Courtesy of FORD MOTOR COMPANY
  6. NOTE: Do not drive the manual control shaft pin through the manual control shaft. The manual control shaft pin will contact the transmission case causing damage to the transmission case.

    Locking pliers. Discard the specified component. Follow local disposal regulations.

    GFD341164Courtesy of FORD MOTOR COMPANY
    1. Hold the TR sensor in place and slide the manual shaft outward until the manual shaft is out of the transmission case.
    2. Remove the TR sensor from the transmission, leaving the park pawl actuating rod attached to the TR sensor.
GFD341165Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals