Anti-Lock Brake System (ABS) Module: Removal

NOTE: Removal steps in this procedure may contain installation details.

NOTE: The ABS module and HCU are released individually. A new ABS module does not come equipped with an HCU.

NOTE: The PMI process must begin with the current ABS module installed. If the current ABS module does not respond to the diagnostic scan tool, the tool may prompt for As-Built Data as part of the repair.

Using a diagnostic scan tool, begin the PMI process for the ABS module following the on-screen instructions.
NOTE: The HCU and ABS module are released individually. A new HCU does not come equipped with an ABS module.

Remove the HCU. Refer to: Hydraulic Control Unit (HCU) .