LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2018 >> Expedition XLT, RWD >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Abs Guided Routine Testing >> Pinpoint Tests >> Pinpoint Tests Z: ABS Module Configuration Concern >> Normal Operation and Fault Conditions
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Normal Operation and Fault Conditions

During new module installation, configuration files are loaded into the new module being replaced. If a discrepancy is detected between the modules or an incomplete programming procedure is carried out, a DTC sets. 

PPT Z ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U0300:51 Internal Control Module Software Incompatibility: Not Programmed This DTC sets when the software release level has not been programmed into the module. This is most likely due to incomplete or improper module programming procedures.
U2016:47 Control Module Main Software: Watchdog/Safety Micro-Controller Failure Sets due to incomplete or improper module programming procedures.
U2100:00 Initial Configuration Not Complete: No Sub Type Information Sets due to incomplete or improper module programming procedures.
U2101:00 Control Module Configuration Incompatible: No Sub Type Information Sets due to incomplete or improper module programming procedures.
U2200:00 Control Module Configuration Memory Corrupt: No Sub Type Information Sets due to incomplete or improper module programming procedures.
PPT Z SASM DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U2016:47 Control Module Main Software: Watchdog/Safety Micro-Controller Failure Sets due to incomplete or improper module programming procedures.
U2100:00 Initial Configuration Not Complete: No Sub Type Information Sets due to incomplete or improper module programming procedures.
scientia non olet · About LEMON Manuals