LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2017 >> Flex SE >> Repair and Diagnosis >> Quick Lookups >> DTC Index >> Information System And Entertainment System (SONY 8 Inch Touchscreen 12 Speakers) DTCS >> ACM
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Information System And Entertainment System (SONY 8 Inch Touchscreen 12 Speakers) DTCS: ACM

DTC INDEX

DTC Description Action
B1A56:21 Antenna: Signal Amplitude < Minimum GO to Pinpoint Test A .
B1A89:11 Satellite Antenna: Circuit Short To Ground GO to Pinpoint Test B .
B1A89:13 Satellite Antenna: Circuit Open GO to Pinpoint Test B .
B1D19:49 Compact Disc Unit: Internal Electronic Failure GO to Pinpoint Test V .
B1D19:4B Compact Disc Unit: Over Temperature GO to Pinpoint Test V .
U0155:00 Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information GO to Pinpoint Test AG .
U0238:00 Lost Communication With Digital Audio Control Module "D": No Sub Type Information GO to Pinpoint Test AJ .
U0253:00 Lost Communication With Accessory Protocol Interface Module: No Sub Type Information GO to Pinpoint Test AK .
U0256:00 Lost Communication With Front Controls Interface Module "A": No Sub Type Information GO to Pinpoint Test AL .
U0257:00 Lost Communication With Front Controls/Display Interface Module: No Sub Type Information GO to Pinpoint Test AM .
U201A:51 Control Module Main Calibration Data: Not Programmed
  • This DTC sets due to incomplete or incorrect PMI procedures. CHECK the vehicle service history for recent service actions related to the ACM.
  • If there have been recent service actions with the ACM, INSTALL as-built data from PTS, following the diagnostic scan tool instructions under Module Programming>As-Built.
  • If there have been no recent service actions, INSTALL a new ACM to correct the failure to retain configuration data. REFER to Audio Control Module (ACM) .
U2100:00 Initial Configuration Not Complete: No Sub Type Information
  • This DTC sets due to incomplete or incorrect PMI procedures. CHECK the vehicle service history for recent service actions related to the ACM.
  • If there have been recent service actions with the ACM, INSTALL as-built data from PTS, following the diagnostic scan tool instructions under Module Programming>As-Built.
  • If there have been no recent service actions, INSTALL a new ACM to correct the failure to retain configuration data. REFER to Audio Control Module (ACM) .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information
  • This DTC sets due to incomplete or incorrect PMI procedures. CHECK the vehicle service history for recent service actions related to the ACM.
  • If there have been recent service actions with the ACM, INSTALL as-built data from PTS, following the diagnostic scan tool instructions under Module Programming>As-Built.
  • If there have been no recent service actions, INSTALL a new ACM to correct the failure to retain configuration data. REFER to Audio Control Module (ACM) .
U3000:41 Control Module: General Checksum Failure
  • CLEAR the DTC.
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC U3000:41 is retrieved again, INSTALL a new ACM. REFER to Audio Control Module (ACM) .
U3000:42 Control Module: General Memory Failure
  • CLEAR the DTC.
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC U3000:42 is retrieved again, INSTALL a new ACM. REFER to Audio Control Module (ACM) .
U3000:96 Control Module: Component Internal Failure
  • CLEAR the DTC.
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC U3000:96 is retrieved again, INSTALL a new ACM. REFER to Audio Control Module (ACM) .
U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to Pinpoint Test AN .
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to Pinpoint Test AP .