Power Transfer Unit Fluid Level Check
WARNING: This page is about a different variant/trim than selected.
Materials
| Name | Specification |
|---|---|
| Motorcraft® SAE 75W-140 Synthetic Rear Axle Lubricant XY-75W140-QL | WSL-M2C192-A |
Check
- 1.
With the vehicle in NEUTRAL, position it on a hoist. REFER to: Jacking and Lifting - Overview .
- 2.
If equipped. Remove the retainers and the underbody shield.
- 3.
Remove the PTU fill plug.
- 4.
Fill the PTU with clean fluid, level with the fill plug opening.Material
: Motorcraft® SAE 75W-140 Synthetic Rear Axle Lubricant / XY-75W140-QL (WSL-M2C192-A)
- 5.
Install the PTU fill plug.Torque
: 33 lb.ft (45 Nm)
- 6.
If equipped. Install the underbody shield.