Handles, Locks, Latches And Keyless Entry System (W/O IA) DTCS: DDM
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B106E | Solid State Driver Disabled Due to Short Circuit | GO to Pinpoint Test T . |
| B106F | Module Disabled Due to External Fault | GO to Pinpoint Test T . |
| B1317 | Battery Voltage High | GO to Pinpoint Test U . |
| B1318 | Battery Voltage Low | GO to Pinpoint Test V . |
| B1342 | ECU Is Faulted | DIAGNOSE all other DTCs first. CLEAR the DTCs and REPEAT the self-test. If DTC B1342 is retrieved again, INSTALL a new DDM. REFER to Driver Door Module (DDM) . |
| B1534 | Memory 1 Switch Circuit Short To Ground | REFER to Seating . |
| B1538 | Memory 2 Switch Circuit Short To Ground | REFER to Seating . |
| B1667 | Mirror Driver Up/Down Motor Stalled | REFER to Rear View Mirrors . |
| B1668 | Mirror Driver Right/Left Motor Stalled | REFER to Rear View Mirrors . |
| B1733 | Mirror Driver Vertical Switch Circuit Failure | REFER to Rear View Mirrors . |
| B1737 | Mirror Driver Horizontal Switch Circuit Failure | REFER to Rear View Mirrors . |
| B1741 | Mirror Passenger Vertical Switch Circuit Failure | REFER to Rear View Mirrors . |
| B1745 | Mirror Passenger Horizontal Switch Circuit Failure | REFER to Rear View Mirrors . |
| B2223 | Mirror Driver Drive Circuit Failure | REFER to Rear View Mirrors . |
| B2320 | Mirror Driver Horizontal Feedback Potentiometer Circuit Failure | REFER to Rear View Mirrors . |
| B2322 | Mirror Driver Horizontal Feedback Potentiometer Circuit Short to Battery | REFER to Rear View Mirrors . |
| B2324 | Mirror Driver Vertical Feedback Potentiometer Circuit Failure | REFER to Rear View Mirrors . |
| B2326 | Mirror Driver Vertical Feedback Potentiometer Circuit Short to Battery | REFER to Rear View Mirrors . |
| B2477 | Module Configuration Failure | Using a scan tool, CARRY OUT the PMI using As-Built data. |
| B2574 | Drivers Door Lock Switch Short to Ground | GO to Pinpoint Test L . |
| B2575 | Drivers Door Unlock Switch Short to Ground | GO to Pinpoint Test L . |
| U0140 | Lost Communication With Body Control Module (GEM) | GO to Pinpoint Test W . |
| U2050 | No Application Present | Using a scan tool, CARRY OUT the PMI using As-Built data. |