October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Normal Operation and Fault Conditions

With the ignition ON, the BCM sends messages to the SASM over the HS-CAN. If the SASM does not receive these messages within the specified time frame, the module sets a DTC. This can be due to a BCM failure, a circuit failure on the HS-CAN or an excessive load on the network. For information on the cruise control messages sent to the SASM by the BCM, refer the Description and Operation in Anti-Lock Brake System (ABS) And Stability Control .