October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Selector Lever Cable Adjustment - 6F35
- Remove the air cleaner outlet pipe. Refer to
INTAKE AIR DISTRIBUTION AND FILTERING
.
-
- Set the selector lever to the drive (D) position.
-
- Rotate the manual control lever clockwise until it stops.
- Rotate the manual control lever counterclockwise 1 detent.
-
- Carefully pry outward the adjuster lock tabs.
- While holding the adjuster lock tabs outward, slide the lock to unlock the selector lever cable.
-
NOTE:
To prevent selector lever cable damage, do not apply force to the selector lever cable between the manual control lever and the selector lever cable bracket.
NOTE:
Make sure that the selector lever cable end is correctly installed onto the manual control lever ball stud by pulling back on the selector lever cable end.
-
NOTE:
After locking the adjuster, pull back on the adjuster to make sure it is securely installed.
- Install the air cleaner outlet pipe. Refer to
INTAKE AIR DISTRIBUTION AND FILTERING
.
- Verify that the vehicle starts in PARK and NEUTRAL only and that the reverse lamps illuminate in REVERSE.