LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Taurus SHO >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System (Battery, Mounting And Cables) >> Removal And Installation >> Battery Current Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Battery Current Sensor: Installation

  1. NOTE: The battery current sensor must be installed in the proper position and orientation to function correctly.

    With the battery current sensor tape tab pointing downward, position the battery current sensor to the index-mark on the battery cable and secure with electrical tape.

  2. Connect the battery current sensor electrical connector.
  3. Install the ACL outlet pipe and cover. For additional information, refer to INTAKE AIR DISTRIBUTION & FILTERING .
  4. Connect the negative battery cable terminal to the battery terminal and install the battery terminal nut.
    • Tighten to 9 Nm (80 lb-in).
scientia non olet · About LEMON Manuals