LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Fiesta Titanium, 4D Hatchback, Automatic DCT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Disassembly And Assembly Of Subassemblies >> Differential >> Disassembly
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Disassembly And Assembly Of Subassemblies: Differential: Disassembly

  1. NOTE: Take care not to damage the differential impulse ring.

    Using the special tools, remove and discard the differential bearings.

    Fig 1: Removing Differential Bearings Using Special Tools
    G08867289Courtesy of FORD MOTOR CO.
  2. Using a 1500W heat gun, slightly heat the impulse ring. Remove the impulse ring.
  3. Remove and discard the differential ring gear bolts. Lightly tap the ring gear to separate it from the differential case.
  4. Clean all parts in clean solvent and dry with compressed air.
scientia non olet · About LEMON Manuals