LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Expedition EL Limited, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 165 (Information System And Entertainment System) >> General Procedures >> Accessory Protocol Interface Module (APIM) Reset
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Accessory Protocol Interface Module (APIM) Reset

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Carrying out an APIM Reset consists of a battery disconnect and a SYNC® system Master Reset.
NOTE: This procedure will clear all CMDTCs. The DTCs must be recorded now if other (non SYNC®) diagnoses are to be performed after this procedure.
  1. Remove any devices connected to the USB port(s), audio input jack (if equipped), or media hub (if equipped).
  2. NOTE: After the APIM reset procedure has been completed the customer should be advised to reset their device following the manufacturer's instructions. Refer to the device's owner's manual and/or website for information on how to perform a Manual / Master Reset or Clear. Devices can be powered off and back on for a simple re-boot. In some cases the device's battery may also need to be removed and re-installed to complete a re-boot. In addition, cell phones may need to have SYNC® deleted from the Bluetooth menu prior to re-pairing the phone to the SYNC® system. Customer devices may affect the operation of SYNC® and this should be understood to prevent unnecessary diagnosis or repairs to the system.

    Disconnect the negative battery cable for 1 minute, then reconnect it. Refer to BATTERY, MOUNTING AND CABLES .

  3. NOTE: Performing a Master Reset returns all preference settings to the factory defaults, erases all the phone book and call histories, and deletes any devices paired with the SYNC® system. On vehicles equipped MyFord Touch or MyLincoln Touch with navigation, the customer's saved destination points (home address and points of interest) and preferences will also be lost with a Master Reset.

    Carry out a SYNC® system Master Reset. Refer to the owner's literature

  4. Verify system function using the Multi-Media Interface Tester 105-00120, to test the audio output for the audio input jack/socket (if equipped), USB port(s), and Bluetooth. If equipped, use the RCA Adapter 105-00121 to test the audio output for the RCA jacks.
  5. If a concern is still present return to the Symptom Charts .