LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Escape Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 404 (Anti-Theft System - Passive Anti-Theft System (Pats) Without Intelligent Access) >> General Procedures >> Key Programming Using Diagnostic Equipment
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Key Programming Using Diagnostic Equipment

WARNING: This page is about a different car, the 2014 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If 8 keys are already programmed, this procedure does not allow any more PATS  keys to be programmed without erasing all stored key codes first.
  1. Insert the unprogrammed PATS  key into the ignition key cylinder and turn the ignition key cylinder to RUN.
  2. From the scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the IDS  on-screen instructions to enter PATS  security access.
  3. From the scan tool menu select "Program additional ignition key" and follow the IDS on-screen instructions.
  4. The engine should now start with the new PATS  key.
scientia non olet · About LEMON Manuals