LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Escape S >> Repair and Diagnosis >> External Pages >> Different car >> Section 342 (Information System And Entertainment System - Premium) >> Removal And Installation >> Front Controls Interface Module (FCIM) >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Front Controls Interface Module (FCIM): Removal

WARNING: This page is about a different car, the 2014 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the LH  and RH  finish panel. REFER to INSTRUMENT PANEL
  2. Remove the 4 FCIM  screws.
    1. To install, tighten to 2 Nm (18 lb-in).
  3. Pull back on the FCIM  starting at the bottom and working to the top to release the clips and remove the FCIM  .
    1. Disconnect the electrical connector.