Component testing procedure
COMPONENT TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminal | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Start circuit | 4 and 7 | Off | Open circuit |
| ACC | Open circuit | ||
| Run | Open circuit | ||
| Start | Closed circuit | ||
| Run/Start power circuit | 4 and 1 | Off | Open circuit |
| ACC | Open circuit | ||
| Run | Closed circuit | ||
| Start | Closed circuit | ||
| Run/ACC power circuit | 4 and 6 | Off | Open circuit |
| ACC | Closed circuit | ||
| Run | Closed circuit | ||
| Start | Open circuit | ||
| Key reminder circuit | 4 and 5 | Key In | Closed circuit |
| Key Out | Open circuit | ||
| Key removal inhibit circuit | 4 and 3 | 65-75 Ohms |