Component testing procedure
COMPONENT TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Left mirror | Selector switch left | ||
| Up | 6 and 1 4 and 3 |
Up | Closed circuit |
| Down | 6 and 3 4 and 1 |
Down | Closed circuit |
| Left | 6 and 3 4 and 7 |
Left | Closed circuit |
| Right | 6 and 7 4 and 3 |
Right | Closed circuit |
| Right mirror | Selector switch right | ||
| Up | 6 and 2 4 and 3 |
Up | Closed circuit |
| Down | 6 and 3 4 and 2 |
Down | Closed circuit |
| Left | 6 and 3 4 and 5 |
Left | Closed circuit |
| Right | 6 and 5 4 and 3 |
Right | Closed circuit |