Removal And Installation: Notes
WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
The boots and clamps are designed to provide an airtight seal and protect the internal components of the steering gear. If the seal is not airtight the vacuum generated during turning will draw water and contamination into the gear causing premature damage.
CAUTION:
Zip ties do not produce an airtight seal and must not be used.
CAUTION:
The inner ball joint grease is not compatible with water and contamination trapped in the grease will degrade the life of the joint.
CAUTION:
If present, the orientation of the vent tube must be noted so the boots and vent tubes can be installed in the correct location.