Section 2208 (HVAC - Climate Control System (Service Information))
WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Air Conditioning
- The A/C refrigerant system is a clutch cycling TXV type. The system components are the following
- A/C Compressor and Clutch Assembly
- A/C Pressure Relief Valve
- A/C Condenser/Power Steering Combo Cooler
- Evaporator Core
- TXV
- Receiver/Drier
- Evaporator Temperature Sensor
- A/C Pressure Transducer
- Service Gauge Port Valves
- Refrigerant System Dye
- Air Distribution and Filtering
- Control Components
- Control System Logic
- EMTC - Base
- HVAC Module - Remote Mount
- Notes
- Control System Inputs
- HVAC Module - Without Touchscreen System
- HVAC Module - With Touchscreen System
- In-Vehicle Temperature and Humidity Sensor
- Autolamp/Sunload Sensor (Solar Radiation Sensor)
- AAT Sensor
- Control System Outputs
- Blower Motor Speed
- Single Zone Temperature Blend Door Position
- Dual Zone Temperature Blend Door Position
- Airflow Mode Door Position
- Air Inlet Mode Door Position
- Heating and Ventilation
- Air Conditioning
- Removal And Installation
- Air Conditioning - Exploded View
- Air Conditioning (A/C) Compressor
- Blower Motor
- Blower Motor Resistor
- Blower Motor Speed Control
- Clutch and Clutch Field Coil
- Compressor to Condenser Discharge Line
- Condenser Core
- Evaporator Core
- Heater Core
- Heater Core And Evaporator Core Housing
- Heating Ventilation Air Conditioning (HVAC) Module
- In-Vehicle Temperature and Humidity Sensor
- Mode Door Actuator - Air Inlet Door
- Mode Door Actuator - Defrost/Panel/Floor Door
- Plenum Chamber
- Receiver Drier Cartridge
- Register
- Temperature Blend Door Actuator - Passenger Side
- Temperature Blend Door Actuator - Driver Side
- Thermostatic Expansion Valve
- Thermostatic Expansion Valve Manifold and Tube Assembly