Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: It is not necessary to remove the Audio Front Control Module (ACM) to retrieve the part number. For additional information, refer to AUDIO CONTROL MODULE (ACM) SELF-DIAGNOSTIC MODE .

All except base AM/FM

NOTE: Module configuration is required when a new ACM is being installed.

Upload the ACM configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION .
Base AM/FM
Remove the center instrument panel finish panel. For additional information, REFER to INSTRUMENT PANEL AND CONSOLE .
Single CD, CD6
Remove the Front Controls Interface Module (FCIM). For additional information, refer to FRONT CONTROLS INTERFACE MODULE (FCIM) .
Navigation
Remove the Front Display Interface Module (FDIM). For additional information, refer to FRONT DISPLAY INTERFACE MODULE (FDIM) .
All Audio Control Modules (ACMs)
Remove the 4 screws and the ACM.
- Disconnect the electrical connectors.
To install, reverse the removal procedure.
- For all ACMs except base AM/FM, download the configuration information to the ACM. For additional information, refer to PMI in MODULE CONFIGURATION .