Throttle Position (TP) Sensor - 3.5L GTDI: Installation

WARNING: This page is about a different car, the 2015 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.

1.

NOTE: When installing the new TP sensor, make sure that the radial locator tab on the TP sensor is aligned with the radial locator hole on the ETB.

NOTE: Do not use power tools.

Install the new TP sensor.
- Using hand tools, install the 2 new bolts.
  - Tighten to 3 Nm (27 lb-in).

Courtesy of FORD MOTOR COMPANY

2.

Connect the TP sensor electrical connector.

Courtesy of FORD MOTOR COMPANY

3.

Install the CAC outlet pipe. Refer to Intake Air Distribution and Filtering .