Section 168 (HVAC - Climate Control System - F150): Specifications
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| Motorcraft® PAG Refrigerant Compressor Oil YN-12-D |
WSH-M1C231-B | 177 ml (6 fl oz) |
| Motorcraft® R-134a Refrigerant YN-19 (US); CYN-16-R (Canada) |
WSH-M17B19-A | 0.68 kg (24 oz) (1.5 lb) |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Magnetic Clutch | |
| Clutch air gap clearance | 0.35-0.65 mm (0.014-0.026 in) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| A/C clutch disc and hub bolt | 14 | - | 124 |
| A/C compressor discharge fitting nut | 15 | - | 133 |
| A/C compressor bolts | 25 | 18 | - |
| A/C compressor suction fitting nut | 15 | - | 133 |
| Air inlet duct bracket nut | 7 | - | 62 |
| Condenser inlet fitting bolt | 15 | - | 133 |
| Condenser outlet fitting nut | 15 | - | 133 |
| Evaporator-to-compressor suction line fitting nut | 15 | - | 133 |
| Fan shroud bolts | 15 | - | 133 |
| Ground cable nut | 9 | - | 80 |
| Heater core and evaporator core housing nuts | 7 | - | 62 |
| High-pressure Schrader-type valve | 2.5 | - | 22 |
| High-pressure service gauge port valve cap | 0.8 | - | 7 |
| Horn assembly bolt | 10 | - | 89 |
| Junction box bracket bolts | 10 | - | 89 |
| Low-pressure Schrader-type valve | 1.8 | - | 16 |
| Low-pressure service gauge port valve cap | 0.8 | - | 7 |
| Plenum chamber nut | 7 | - | 62 |
| Radiator bolts | 15 | - | 133 |
| Steering column cover reinforcement bolts | 9 | - | 80 |
| Thermostatic Expansion Valve (TXV) bolts | 8 | - | 71 |
| TXV manifold and tube bracket bolt | 8 | - | 71 |
| TXV fitting nut | 15 | - | 133 |