Utility Storage Compartment: Service and Repair

Storage Compartment - Upper

Removal and Installation

1. NOTE: Steering column shroud removed to show clarity.
Remove the upper storage compartment tether nut.

- To install, tighten to 6 Nm (53 lb-in).






2. Remove the upper storage compartment mat and the 2 upper storage compartment screws.

3. Remove the upper storage compartment in the following sequence.
1. Pull the upper storage compartment toward the rear of the vehicle to release the 5 retaining clips.

2. Disconnect the electrical connector, if equipped.


4. To install, reverse the removal procedure.