LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Focus Electric >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System - Passive Anti-Theft System >> General Procedures >> Erase All Keys and Key Programming >> Programming
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Erase All Keys and Key Programming: Programming

  1. WARNING: Before beginning any service procedure in this information, refer to HEALTH AND SAFETY PRECAUTIONS . Failure to follow this instruction may result in serious personal injury.

    Refer to: HEALTH AND SAFETY PRECAUTIONS .

    NOTE: This procedure erases all MyKey® features on all of the keys that are programmed to the vehicle. All of the keys then operate as normal (admin) keys with no restrictions.
    NOTE: This procedure erases all programmed ignition keys from the vehicle memory. The vehicle cannot start until a minimum of 2 keys are programmed into the vehicle.
    NOTE: To enter the PATS  security access if no programmed IA keys are available, start a vehicle session using a tear tag or PCM  part number. The PATS  security access can still be granted even with the ignition off.
  2. Refer to: DIAGNOSTIC METHODS .
  3. From the scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the IDS  on-screen instructions to enter the PATS  security access.
  4. NOTE: A maximum of 8 keys can be programmed into the vehicle.

    From the scan tool menu, select the appropriate key programming procedure and follow the on-screen instructions to erase and program the Intelligent Access (IA) key(s).

scientia non olet · About LEMON Manuals