LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Explorer Base, 2.0 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Climate Control System) >> Removal And Installation >> Plenum Chamber >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. Remove the plenum chamber bracket screw.
  3. Remove the 4 plenum chamber screws.
  4. Disconnect the panel/floor door mode door actuator electrical connector.
  5. Remove the plenum chamber.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals