LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Edge Sport, AWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Four Wheel Drive (4WD) Systems >> Removal And Installation >> All Wheel Drive (AWD) Relay Module >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

  1. If equipped, remove the RH floor storage compartment.
    1. Lift the liftgate scuff plate upward, releasing the 4 retaining clips. For additional information, refer to Interior Trim - Exploded View in INTERIOR TRIM AND ORNAMENTATION .
    2. Remove the RH floor storage compartment.
  2. Disconnect the All-Wheel Drive (AWD) relay module electrical connector.
  3. Remove the AWD relay module nut.
    • To install, tighten to 7 Nm (62 lb-in).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals