Clear MyKey™
WARNING: This page is about a different car, the 2013 Lincoln MKX and 2013 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If disabling an IA key, make sure only the admin key is inside the vehicle. It does not need to be in the backup transceiver slot.
- Using an admin key, turn the ignition to RUN.
- From the message center main menu, use the up and down arrow buttons to scroll to and select Settings. Press the OK button.
- Use the up and down arrow buttons to scroll to and select MyKey. Press the OK button.
- Use the up and down arrow buttons to scroll to and select Clear MyKeys. Press the OK button.
NOTE:
This procedure clears the MyKey™ feature on all of the keys that are programmed to the vehicle. All of the keys then operate as normal (admin) keys with no restrictions.