Removal And Installation: Axle: Installation
WARNING: This page is about a different variant/trim than selected.
- Position the axle and install a new axle pivot bolt and nut.
- Install the radius arm. For additional information, refer to RADIUS ARM .
- Install the wheel spindle. For additional information, refer to WHEEL SPINDLE .
- With the weight of the vehicle on the wheels, tighten the axle pivot nut to 175 Nm (129 lb-ft).
- Check and, if necessary, align the front end. For additional information, refer to SUSPENSION SYSTEM - GENERAL INFORMATION .
NOTE:
Do not tighten the nut at this time.