LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Ranger 2D Pickup, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (HVAC Climate Control System) >> Removal And Installation >> Function Selector Switch >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

WARNING: This page is about a different car, the 2009 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the climate control assembly. For additional information, refer to CLIMATE CONTROL ASSEMBLY .
  2. Gently pull and remove the function selector switch knob.
  3. Release the clips and remove the function selector switch.
    Fig 1: Locating Clips And Function Selector Switch
    G06182560Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals