LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Ranger 2D Pickup, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (Electronic Engine Control) >> Removal And Installation >> Powertrain Control Module (PCM) >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Powertrain Control Module (PCM): Removal

WARNING: This page is about a different car, the 2009 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION .
  2. Remove the PCM wiring harness retainer nut.
  3. Remove the ground wire stud bolt.
  4. Disconnect the 3 PCM electrical connectors.
  5. Remove the 2 nuts and the PCM.
scientia non olet · About LEMON Manuals