LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Explorer XLT, AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Fuel Delivery >> Fuel System - General Information >> General Procedures >> Spring Lock Couplings >> Connect
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Spring Lock Couplings: Connect

  1. Align and push the spring lock coupling onto the tube until fully seated.
    Fig 1: Pushing Spring Lock Coupling Onto Tube
    G07430797Courtesy of FORD MOTOR CO.
  2. Pull on the coupling to make sure it is fully engaged.
  3. Connect the battery ground cable. REFER to BATTERY DISCONNECT .
scientia non olet · About LEMON Manuals