LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Explorer Base, AWD, 6F55 >> Repair and Diagnosis >> Transmission >> Transfer Case >> Four Wheel Drive (4WD) Systems >> Removal And Installation >> All Terrain Control Module (ATCM) >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

All Terrain Control Module (ATCM): Removal

  1. Disconnect the arm rest latch trim panel from the upper finish panel and position it.
    2. NOTE: It is not necessary to remove the upper finish panel to access the All Terrain Control Module (ATCM) retaining tabs.
  2. Remove the upper finish panel screw and lift the upper finish panel upward, releasing the rear retaining clips.
  3. Remove the All Terrain Control Module (ATCM) from the upper finish panel.
  1. Disconnect the All Terrain Control Module (ATCM) electrical connector.
  2. Press the All Terrain Control Module (ATCM) retaining tabs inward and remove the All Terrain Control Module (ATCM) from the upper finish panel.
scientia non olet · About LEMON Manuals