LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Explorer Base, AWD, 6F50 >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) And Stability Control >> Diagnostic Routine(S) >> Diagnostic Routine M >> Pinpoint Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Pinpoint Test

  1. CHECK FOR Instrument Panel Cluster (IPC) Diagnostic Trouble Codes (DTCs)
    1. Ignition ON.
    2. Using a scan tool, carry out the Instrument Panel Cluster (IPC) self-test.
      • Are any Diagnostic Trouble Codes (DTCs) present in the Instrument Panel Cluster (IPC)? 
      1. Yes:  REFER to DTC CHART: INSTRUMENT PANEL CLUSTER (IPC) .
      2. No:  GO to 2  on page 2.
  2. CHECK THE MESSAGE CENTER TRACTION CONTROL SELECTION
    1. Using the message center buttons, configure the traction control on and then off again. Refer to the Owner's Manual.
      • Does the TRACTION CONTROL selection change when configured to on and off? 
      1. Yes:  GO to 3  on page 2.
      2. No:  REFER to DIAGNOSTIC ROUTINE AD .
  3. CHECK THE STABILITY/TRACTION CONTROL DISABLED INDICATOR (SLIDING CAR OFF ICON)
    1. Using the message center buttons, configure the traction control on and then off again. Refer to the Owner's Manual.
      • Does the sliding car OFF icon illuminate when the traction control is turned off? 
      1. Yes:  The system is operating correctly at this time. TEST the system for normal operation.
      2. No:  REFER to DIAGNOSTIC ROUTINE O .
scientia non olet · About LEMON Manuals