LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Explorer Base, AWD, 6F50 >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Rear View Mirror >> Diagnostic Routine(S) >> Diagnostic Routine H >> Pinpoint Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Pinpoint Test

  1. REVIEW THE Diagnostic Trouble Codes (DTCs)
    1. Review the Diagnostic Trouble Codes (DTCs) from the Driver Seat Module (DSM) self-test.
      • Are Diagnostic Trouble Codes (DTCs) B106F and B1342 present? 
      • Yes:  CORRECT the cause of any other Diagnostic Trouble Codes (DTCs) present first. When other Diagnostic Trouble Codes (DTCs) are corrected, INSTALL a new Driver Seat Module (DSM). REFER to DRIVER SEAT MODULE (DSM) .
      • No:  GO to step 2 .
  2. REPAIR OTHER Diagnostic Trouble Codes (DTCs)
    1. Repair the cause of any Diagnostic Trouble Codes (DTCs) present, other than Diagnostic Trouble Code (DTC) B106E. REFER to DTC CHART: DRIVER SEAT MODULE (DSM) .
    2. Clear the Diagnostic Trouble Codes (DTCs).
    3. Using a scan tool, perform the Driver Seat Module (DSM) self-test.
      • Is Diagnostic Trouble Code (DTC) B106E still present? 
      • Yes:  The fault causing the output state to be disabled is still present. REPAIR the cause of the concern.
      • No:  The system is operating correctly at this time. The concern was caused by a fault in one of the output circuits.
scientia non olet · About LEMON Manuals