LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Edge AWD V6-3.7L >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> Crankshaft Main Bearing
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Crankshaft Main Bearing













MAIN BEARING CAP

NOTE: While tightening the main bearing vertical bolts, push the crankshaft forward and the No. 4 main bearing cap rearward to seat the crankshaft thrust washers.

Tighten the main bearing bolts in the sequence shown in 2 stages.
Stage 1: Tighten fasteners 1 through 8 to 60 Nm (44 lb-ft).
Stage 2: Tighten fasteners 1 through 8 an additional 90 degrees.







Install the new 8 main bearing cap side bolts. Tighten in the sequence shown in 2 stages.
Stage 1: Tighten fasteners 1 through 8 to 45 Nm (33 lb-ft).
Stage 2: Tighten fasteners 1 through 8 an additional 90 degrees.







Install the main bearing cap support brace and the new bolts. Tighten in the sequence shown in 2 steps.
Stage 1: Tighten fasteners to 20 Nm (177 lb-in).
Stage 2: Tighten fasteners an additional 180 degrees.





scientia non olet · About LEMON Manuals