LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Crown Victoria V8-4.6L Flex Fuel >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Camshaft Position Sensor: Service and Repair




Camshaft Position (CMP) Sensor

Removal and Installation









1. Disconnect the Camshaft Position (CMP) sensor electrical connector.

2. Remove the bolt and the CMP sensor.
- To install, tighten to 10 Nm (89 lb-in).

3. To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals