September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Removal and Installation
- Remove the wheel and tire. For additional information, refer to
WHEELS & TIRES
.
- Disconnect the wheel speed sensor electrical connector.
- Remove the 2 scrivets and position aside the fender splash shield.
- Remove the wheel speed sensor harness pin-type retainer.
- Remove the 2 wheel speed sensor harness retainers.
- Remove the bolt and the wheel speed sensor.
- To install, tighten to 15 .m (133 lb-in).
- To install, reverse the removal procedure.