LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2010 >> Explorer AWD V6-4.0L >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Suspension >> Axle Nut
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Axle Nut

Front Drive Halfshafts (4WD)

Remove and discard the halfshaft nut.
To install, tighten the new nut to 250 Nm (184 lb-ft).

Rear Drive Halfshafts

NOTICE: Install and tighten the new halfshaft nut to specification within 5 minutes of starting it on the threads. Always install a new halfshaft nut after loosening or when not tightening within the specified time or damage to the components may occur.

Install a new halfshaft nut.
Tighten to 275 Nm (203 lb-ft).

scientia non olet · About LEMON Manuals